MCP – Construction Site Painting Guide Part 2 – Digger & Cement Mixer

Welcome to my latest painting guide! Today I’m covering the digger and the cement mixer from the Construction Site terrain pack.


You can help me do more!

I make these guides for everyone to learn to paint, but they do cost money, time and resources. If you enjoyed this guide, you can donate £1-3 to help me make more!

Donate via Ko-Fi Donate via PayPal


Prep: Fully build all models and undercoat black.

A note on drybrushing: When covering larger areas, especially on terrain, I prefer to use drybrushing. This technique requires you to add a light amount of paint to the brush and then remove most of it. Lightly brushing over some kitchen roll until only a small amount of chalky paint is left. When brushed over a model this hits the hard edges but can also be used to build up in layers to create a gradation in colour.

A specific drybrush helps greatly, especially on larger models. Something like this or this.

Yellow Paint

Stage 1

Averland Sunset: Apply a basecoat to the yellow areas. Apologies for the lack of a photo, I was so excited to keep painting I forgot.

Stage 2

Averland Sunset: Apply a heavy drybrush from the top down.

Stage 3

Yriel Yellow: Apply a medium drybrush from the top down.

Stage 4

Phalanx Yellow: Apply a light drybrush around the top.

Metals & Tires

Stage 1

Warplock Bronze: Apply a basecoat to the metals and as scratches over the yellow.

Incubi Darkness: Apply a basecoat to the tires and cab.

Stage 2

Leadbelcher: Apply a drybrush to the metals and a layer to the scratches.

Thunderhawk Blue: Apply a layer to the tires and cab

Stage 3

Ironbreaker: Apply a line highlight to the metals and scratches.

Russ Grey: Apply a line highlight to the tires and cab.

Stage 4

Astrogranite Debris: Apply splodges over the shovel. I also adding these to the tail end of the cement mixer.

Kantor Blue: Apply a basecoat to the windows. I watered this down a touch to help it flow into the squares.

Squig Orange: Apply a basecoat to the lights.

Stage 4

Celestra Grey: Apply a drybrush over the front of the shovel and the tail end of the cement mixer.

Trollslayer Orange: Apply a layer to the lights.

MCP – Construction Site Painting Guide Part 1 – Barrels & Barriers

Welcome to my latest painting guide! This guide will tackle the smaller elements of the Construction Site Terrain Set, the barrels and barriers.


You can help me do more!

I make these guides for everyone to learn to paint, but they do cost money, time and resources. If you enjoyed this guide, you can donate £1-3 to help me make more!

Donate via Ko-Fi Donate via PayPal


Prep: Fully build all models and undercoat black.

A note on drybrushing: When covering larger areas, especially on terrain, I prefer to use drybrushing. This technique requires you to add a light amount of paint to the brush and then remove most of it. Lightly brushing over some kitchen roll until only a small amount of chalky paint is left. When brushed over a model this hits the hard edges but can also be used to build up in layers to create a gradation in colour.

A specific drybrush helps greatly, especially on larger models. Something like this or this.

Barrels

Stage 1

XV-88/Barak-nar Burgandy/Kantor Blue: Apply a basecoat.

Stage 2

Averland Sunset/Khorne Red/Caledor Sky: Apply a heavy drybrush from the top down.

Stage 3

Yriel Yellow/Wazdakka Red/Teclis Blue: Apply a medium drybrush from the top down.

Stage 4

Phalanx Yellow/Evil Sunz Scarlet/Fenrisian Grey: Apply a light drybrush around the top.

Barrel Details

Stage 1

Warplock Bronze: Apply haphazardly to the edges and sides.

Stage 2

Leadbelcher: Apply a layer over the previous colour..

Stage 3

Mournfang Brown: Make a mix with around 3 parts water and apply haphazardly to create stains and drips.

Barriers

Stage 1

XV-88: Apply a basecoat.

Stage 2

Squig Orange: Apply a heavy drybrush from the top down.

Celestra Grey: Apply a heavy drybrush from the top down.

Stage 3

Evil Sunz Scarlet: Apply a light drybrush.

Ulthuan Grey: Apply a medium drybrush.

Stage 4

Wild Rider Red: Apply an edge highlight to the top half.

White Scar: Apply a light drybrush to the top half.

Barrier Details

Stage 1

Warplock Bronze: Apply a basecoat to the light fittings.

Stage 2

Leadbelcher: Apply a drybrush to the light fittings.

Stage 3

Squig Orange: Apply a basecoat to the light.

Stage 4

Trollslayer Orange: Apply a thinned layer to the light.