A-Force

MCP – Gambit & Rogue Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide! Two of my all-time favourite X-Men hit the painting table.

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models. Undercoat black.

Before you begin…

For this guide I’ve switched over to a non metallic metal(NMM) technique. The paints used are within the guide, but take a look at the thinned layers mini-guide for a better understanding.

Gambit

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit and gloves.

Thondia Brown: Apply a basecoat to the jacket and hair.

Phoenician Purple: Apply a basecoat to the chest and kinetic charge.

Karak Stone: Apply a basecoat to the cards.

Bugman’s Glow: Apply a basecoat to the skin.

Dark Reaper: Apply a basecoat to the boots, lining and staff.

Stage 2

Thunderhawk Blue: Apply a layer to the bodysuit and gloves.

Mournfang Brown: Apply a layer to the jacket.

Doombull Brown: Apply a layer to the hair.

Genestealer Purple: Apply a thinned layer to the chest.

Screamer Pink: Apply a layer to the kinetic charge.

Pallid Wych Flesh: Apply a layer to the cards.

Russ Grey: Apply a line highlight and a thinned layer to the boots, suit lining and staff.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit and gloves.

Steel Legion Drab: Apply a thinned layer to the jacket and hair.

Kakophoni Purple: Apply a line highlight to the chest.

Emperor’s Children: Apply a thinned layer to the kinetic charge.

White Scar: Apply a thinned layer to the cards.

Blue Horror: Apply a line highlight and thinned layer to the boots, suit lining and staff.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit and gloves.

Karak Stone: Apply a spot highlight to the jacket and hair.

Fulgrim Pink: Apply a aspot highlight to the kinetic charge.

Abaddon Black/Mephiston Red: carefully apply the symbols to the cards.

White Scar: Apply a spot highlight to the boots, suit lining and staff.

Light Flesh 70.928: Apply a spot highlight to the skin.

Finish by painting the base with the Base Painting guide.

Rogue

Stage 1

Tau Light Ochre: Apply a basecoat to the centre of the bodysuit, boots and gloves.

Warpstone Glow: Apply a basecoat to the sides and legs of the bodysuit.

Rhinox Hide: Apply a basecoat to the jacket and hair.

Celestra Grey: Apply a basecoat to the front patch of hair.

Dark Reaper: Apply a basecoat to the core, base edge and debris.

Khorne Red: Apply a basecoat to the core lens, and inside the x symbols.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Averland Sunset: Apply a layer to the bodysuit, boots, and gloves.

Moot Green: Apply a layer to the sides and legs of the bodysuit.

Doombull Brown: Apply a layer to the hair.

Mournfang Brown: Apply a layer to the jacket.

Ulthuan Grey: Apply a layer to the front patch of hair.

Russ Grey: Apply a line highlight and a thinned layer to the core, base edge and debris.

Mephiston Red: Apply a layer to the core lens and inside of the x symbols.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Flash Gitz Yellow: Apply a line highlight to the bodysuit, boots and gloves.

Skarsnik Green: Apply a line highlight to the sides and legs of the bodysuit.

Skrag Brown: Apply a line highlight to the hair.

Steel Legion Drab: Apply a line highlight to the jacket.

White Scar: Apply a layer to the front patch of hair.

Blue Horror: Apply a line highlight and thinned layer to the core, base edge and debris.

Evil Sunz Scarlet: Apply a spot highlight to the core lens and  inside of the x symbols.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 4

Dorn Yellow: Apply a spot highlight to the bodysuit, boots and gloves.

Gauss Blaster Green: Apply a spot highlight to the sides osides and legs of the bodysuit.

Deathclaw Brown: Apply a spot highlight to the hair.

Karak Stone: Apply a spot highlight to the jacket.

White Scar: Apply a spot highlight to the core, base edges and debris.

Light Flesh 70.928: Apply a spot highlight to the skin.

Finish by painting the explosion with the Explosion painting guide.

MCP – Cassandra Nova & Jean Gray Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide! Cassandra Nova and Jean Grey bring their psychic potency to my roster.

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models. Undercoat black.

Cassandra Nova

Stage 1

Thondia Brown: Apply a basecoat to the jacket, boots and belt.

Incubi Darkness: Apply a basecoat to the shirt.

Steel Legion Drab: Apply a basecoat to the trousers.

Warpstone Glow: Apply a basecoat to the psychic powers.

Skrag Brown: Apply a basecoat to the scarf.

Leadbelcher: Apply a basecoat to the buckle and cane.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Mournfang Brown: Apply a layer to the jacket, boots and belt.

Thunderhawk Blue: Apply a layer to the shirt.

Tallarn Sand: Apply a layer to the trousers 

Moot Green: apply a layer to the psychic powers.

Deathclaw Brown: Apply a layer to the scarf.

Nuln Oil: Apply a shade to the buckles and cane.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Steel Legion Drab: Apply a line highlight to the jacket, boots and belt.

Russ Grey: Apply a line highlight to the shirt.

Karak Stone: Apply a line highlight to the trousers.

Orruk Flesh: Apply a line highlight to the psychic powers.

Tau Light Ochre: Apply a line highlight to the scarf.

Drakenhof Nightshade: Apply a shade to the buckles and cane.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 4

Karak Stone: Apply a spot highlight to the jacket, boots and belt.

Fenrisian Grey: Apply a spot highlight to the shirt.

Ushabti Bone: Apply a spot highlight to the trousers.

Gauss Blaster Green: Apply a spot highlight to the psychic powers.

Averland Sunset: Apply a spot highlight to the scarf.

Canoptek Alloy: Apply a spot highlight to the buckles and cane.

Light Flesh 70.928: Apply a spot highlight to the skin.

Finish by painting the base with the Base Painting guide.

Jean Gray

Stage 1

Tau Light Ochre: Apply a basecoat to the bodysuit.

Night Lord’s Blue: Apply a basecoat to the centre of the bodysuit, gloves, belt and shoulders.

Pink Horror: Apply a basecoat to the psychic powers.

Doombull Brown: Apply a basecoat to the hair.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Averland Sunset: Apply a layer to the bodysuit.

Macragge Blue: apply a layer to the centre strip of the bodysuit and gloves, belt and shoulders.

Emperor’s Children: Apply a thinned layer to the psychic powers.

Skrag Brown: Apply a layer to the hair.

Cadian Fleshtone: Apply a layer to the skin.

Stage 4

Flash Gitz Yellow: Apply a thinned layer to the bodysuit.

Caledor Sky: Apply a line highlight to the centre bodysuit, gloves, belt and shoulders.

Fulgrim Pink: Apply an edge highlight to the psychic powers.

Jokaero Orange: Apply a line highlight to the hair.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 3

Dorn Yellow: Apply a line highlight to the bodysuit.

Temple Guard Blue: Apply a line highlight to the centre bodysuit, gloves, belt and shoulders.

White Scar: Apply a spot highlight to the psychic powers.

Blood letter: Apply a thin layer to the hair.

Light Flesh 70.928: Apply a spot highlight to the skin.

Finish by painting the base with the Base Painting guide.

MCP – Guardians of the Galaxy Commission

/ Deathwatch Studios / Leave a comment

Another batch of Guardians and my 3rd Rocket and Groot!

It makes life a little bit sweeter when they’re to be painted the same as I’ve done before, as that means I have guides…

I really enjoyed every one, again. MCP models are so crisp, characterful and dynamic, they offer a really enjoyable paint no matter if you’ve painted them before.

Take a look at more pictures of this commission below, and if you would like me to paint some of your models get in touch.

MCP – Ironman Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build the model and undercoat black.

Iron Man

Stage 1

Incubi Darkness: Apply a basecoat to the armour.

XV-88: Apply a basecoat to the gold sections of armour.

Stage 2

Thunderhawk Blue: Apply a line highlight to the dark armour sections.

Agrax Earthshade: Apply a wash over the gold sections.

Stage 3

Russ Grey: Apply an edge highlight to the dark armour

Averland Sunset: Apply an edge highlight to the gold sectiosn.

Stage 4

Fenrisian Grey: Apply a spot highlight to the dark armour.

Averland Sunset: Apply a thinned layer to the gold armour, working from the top down.

Stage 5

Blue Horror: Apply a spot highlight to the dark armour, where two or more lines meet.

Phallanx Yellow: Apply a spot highlight to the gold armour.

Glow

Stage 1

Bloodletter: Apply a glaze over the light sources, and bleeding out around them.

Stage 2

Evil Sunz Scarlet: Apply a layer to the centre of each light source, and an edge highlight around them.

Stage 3

Wild Rider Red: Apply a layer to the centre of each light source.

Stage 4

Bloodletter: Apply a light glaze across the light sources.

Finish by painting the base with the Base Painting guide.

MCP – Quicksilver & Scarlet Witch Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Quicksilver

Stage 1

Caledor Sky: Apply a basecoat to the bodysuit.

Celestra Grey: Apply a basecoat to the suit pattern, boots, gloves and hair.

Bugman’s Glow: Apply a basecoat to the skin.

Mephiston Red: Apply a basecoat to the explosion.

Stage 2

Teclis Blue: Apply a layer to the bodysuit.

Ulthuan Grey: Apply a layer to the suit pattern, boots, gloves and hair.

Cadian Fleshtone: Apply a layer to the skin.

Trollslayer Orange: Apply a thinned layer of the centre of the explosion.

Skavenblight Dinge: Apply a layer to the out most areas of the explosion.

Stage 3

Lothern Blue: Apply a thinned layer to the bodysuit.

White Scar: Apply a thinned layer to the suit pattern, boots, gloves and hair.

Basic Skintone 70.815(Vallejo): Apply a thinned layer to the skin.

Yriel Yellow: Apply a thinned layer to the explosion moving closer than the last stage.

Abaddon Black: Apply a thinned layer to the tips of the explosion.

Stage 4

Blue Horror: Apply a line highlight to the suit.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Dorn Yellow: Apply a spot highlight to the centre of the explosion.

Finish by painting the base with the Base Painting guide.

Scarlet Witch

Stage 1

Mephiston Red: Apply a basecoat to the bodysuit, cape, boots, gloves and tiara.

Emperor’s Children: Apply a basecoat to the undersuit.

Screamer Pink: Apply a basecoat to the magic.

Bugman’s Glow: Apply a basecoat to the skin.

Khorne Red: Apply a basecoat to the hair.

Stage 2

Evil Sunz Scarlet: Apply a thinned layer and edge highlight to the bodysuit, cape, boots, gloves and tiara. Apply a layer to the magic.

Fulgrim Pink: Apply a layer to the undersuit.

Cadian Fleshtone: Apply a layer to the skin.

Wazdakka Red: Apply a layer to the hair.

Stage 3

Evil Sunz Scarlet/Slaanesh Grey: Make a 1:1 mix and apply a line highlight to the bodysuit, cape, boots, gloves and tiara.

Pink Horror: Apply a thinned layer to the magic.

Fulgrim Pink: Apply a thinned layer to the undersuit.

Basic Skin Tone 70.815(Vallejo): Apply a thinned layer to the skin.

Squig Orange: Apply a line highlight to the hair.

Stage 4

Slaanesh Grey: Apply a spot highlight to the bodysuit, cape, boots, gloves and tiara.

Emperor’s Children: Apply a spot highlight to the magic.

Fulgrim Pink/White Scar: Make a 1:1 mix and apply a line highlight to the undersuit.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Bloodletter: Apply a glaze to the hair.

Finish by painting the base with the Base Painting guide.

MCP – Crystal & Lockjaw Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Crystal

Stage 1

Zamesi Desert: Apply a basecoat to the hair.

Bugman’s Glow: Apply a basecoat to the skin.

XV-88: Apply a basecoat to the bodysuit.

Caledor Sky: Apply a basecoat to the water.

Incubi Darkness: Apply a basecoat to the bodysuit patterning and gloves and boots.

Trollslayer Orange: Apply a basecoat to the flames.

Stage 2

Agrax Earthshade: Apply a shade to the hair.

Cadian Fleshtone: Apply a layer to the skin.

Averland Sunset: Apply a layer to the bodysuit 

Lothern Blue: Apply a thinned layer to the water.

Thunderhawk Blue: Apply a layer to the bodysuit patterning and boots and gloves.

Fire Dragon Bright: Apply a thinned layer to the centre of the flames.

Stage 3

Blonde Hair 9257(MSP): Apply a line highlight to the hair.

Basic Skintone 70.815(Vallejo): Apply a thinned layer to the skin.

Yriel Yellow: Apply a line highlight to the bodysuit and a thinned layer to the centre of the flames.

Blue Horror: Apply a thinned layer to the edges of the water.

Stage 4

Blonde Highlight 9258(MSP): Apply a spot to the hair.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Phalanx Yellow: Apply a spot highlight to the bodysuit and fire.

White Scar: Apply a spot highlight to the water.

Fenrisian Grey: Apply a spot highlight to the bodysuit lining, boots and gloves.

Finish by painting the base with the Base Painting guide.

Lockjaw

Stage 1

XV-88: Apply a basecoat to the fur.

Eshin Grey: Apply a basecoat to the forehead symbol.

Rhinox Hide: Apply a basecoat to the snout and around the ears and a glaze around the eyes.

Screamer Pink: Apply a basecoat to the mouth and tongue.

White Scar: Apply a basecoat to the eyes.

Blue Horror: Apply a basecoat to the saliva.

Flayed One Flesh: Apply a basecoat to the teeth.

Stage 2

Balor Brown: Apply a layer to the fur.

Russ Grey: Apply a layer to the forehead symbol.

Mournfang Brown: Apply a thinned layer to the snout.

Emperor’s Children: Apply a layer to the mouth and tongue.

Teclis Blue: Apply a circle to the centre of each eye.

Pallid Wych Flesh: Apply a layer to the saliva and teeth.

Thunderhawk Blue: Apply a layer to the nose.

Stage 3

Zandri Dust: Apply a thinned layer to the fur.

Blue Horror: Apply a line highlight to the forehead symbol.

Steel Legion Drab: Apply a line highlight to the snout.

Fulgrim Pink: Apply a line highlight to the mouth and tongue.

Abaddon Black: Apply the pupils to the eyes.

White Scar: Apply a spot highlight to the saliva and teeth.

Russ Grey: Apply a spot highlight to the nose.

Stage 4

Flayed One Flesh: Apply a spot highlight to the fur and the snout.

White Scar: Apply a spot highlight to the forehead symbol and the eyes.

Fulgrim Pink/White Scar: Make a 1:1 mix and apply a spot highlight to the mouth and tongue.

Fenrisian Grey: Apply a spot highlight to the nose.

Finish by painting the base with the Base Painting guide.

MCP – Captain Marvel & Crossbones Painting Guide

/ Deathwatch Studios / 1 Comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Captain Marvel

Stage 1

Kantor Blue: Apply a basecoat to the bodysuit.

Khorne Red: Apply a basecoat to the reds; the boots, sash, gloves and shoulders.

Averland Sunset: Apply a basecoat to the lining.

Bugman’s Glow: Apply a basecoat to the skin.

Zamesi Desert: Apply a basecoat to the hair.

Stage 2

Caledor Sky: Apply a layer to the bodysuit.

Mephiston Red: Apply a layer to the reds.

Agrax Earthshade: Apply a shade to the hair and lining.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Teclis Blue: Apply a highlight to the bodysuit.

Evil Sunz Scarlet: Apply a highlight to the reds.

Yriel Yellow: Apply a line highlight to the lining.

Basic Skintone 70.815(Vallejo): Apply a highlight to the skin.

Blonde Hair 9257(MSP): Apply a layer to the hair.

Stage 4

Baharroth Blue: Apply a line highlight to the bodysuit

Wild Rider Red: Apply a line highlight to the reds.

Dorn Yellow: Apply a spot highlight to the lining.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Blonde Highlight 9258(MSP): Apply a spot highlight to the hair.

Finish by painting the base with the Base Painting guide.

Crossbones

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit, gloves and mask.

Eshin Grey: Apply a basecoat to the straps, pouches and holster.

Celestra Grey: Apply a basecoat to the face mask design.

Leadbelcher: Apply a basecoat to the clasps, knee guards and knuckle dusters.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Thunderhawk Blue: Apply a layer to the bodysuit, gloves and mask.

Dawnstone: Apply a layer to the straps, pouches and holster.

Ulthuan Grey: Apply a layer to the face mask design.

Nuln Oil: Apply a shade to the clasps, knee guards and knuckle dusters.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit, gloves and mask.

Celestra Grey: Apply a line highlight to the straps, pouches and holster.

White Scar: Apply a layer to the face mask design.

Drakenhof Nightshade: Apply a shade to the clasps, knee guards and knuckle dusters.

Basic Skintone 70.815(Vallejo): Apply a thinned layer to the skin.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit, gloves and mask.

Krieg Khaki: Apply a spot highlight to the straps, pouches and holster.

Ironbreaker: Apply a line highlight to the clasps, knee guards and knuckle dusters.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Finish by painting the base with the Base Painting guide.

MCP – Black Bolt & Medusa Painting Guide

/ Deathwatch Studios / 3 Comments

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build Black Bolt, build Medusas body and hair but leave separate, and undercoat black.

Black Bolt

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit.

Celestra Grey: Apply a basecoat to the suit markings.

Bugman’s Glow: Apply a basecoat to the skin.

Thunderhawk Blue: Apply a basecoat to the forehead symbol.

Stage 2

Thunderhawk Blue: Apply a thinned layer to the bodysuit.

Ulthuan Grey: Apply a layer to the suit markings.

Cadian Fleshtone: Apply a layer to the skin.

Russ Grey: Apply a layer to the forehead symbol.

Flayed One Flesh: Apply a basecoat to the teeth.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit.

White Scar: Apply a layer to the suit markings and teeth.

Basic Skin Tone: Apply a thinned layer to the skin.

Blue Horror: Apply a line highlight to the forehead symbol.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

White Scar: Apply a spot highlight to the forehead symbol.

Finish by painting the base with the Base Painting guide.

Medusa

Stage 1

Phoenician Purple: Apply a basecoat to the bodysuit.

Incubi Darkness: Apply a basecoat to the mask, belt, gloves and boots.

Bugman’s Glow: Apply a basecoat to the skin.

Thunderhawk Blue: Apply a basecoat to the wrist bands and belt buckle.

Word Bearers Red: Apply a basecoat to the hair.

Stage 2

Xereus Purple: Apply a layer to the bodysuit.

Thunderhawk Blue: Apply a thinned layer to the mask, belt, gloves and boots.

Cadian Fleshtone: Apply a layer to the skin.

Russ Grey: Apply a thinned layer and a line highlight to the wrist bands and belt buckle.

Evil Sunz Scarlet: Apply a layer to the hair.

Stage 3

Genestealer Purple: Apply a line highlight to the bodysuit.

Russ Grey: Apply a line highlight to the mask, belt, gloves and boots.

Basic Skin tone: Apply a thinned layer to the skin.

Blue Horror: Apply an edge highlight to the wrist bands and belt buckle.

Squig Orange: Apply a thinned layer to the hair.

Stage 4

Kakophoni Purple: Apply a spot highlight to the bodysuit.

Fenrisian Grey: Apply a spot highlight to the mask, belt, gloves and boots.

Light Flesh: Apply a spot highlight to the skin.

White Scar: Apply a spot highlight to the wrist bands and belt buckle.

Fire Dragon Bright: Apply a line highlight to the hair.

Finish by painting the base with the Base Painting guide.

MCP – Another Painting Guide Update!

/ Deathwatch Studios / 2 Comments

I wanted to start by saying thank you to all of the people that have got in touch to say they appreciate the guides. It makes my day to hear that people are finding them so helpful. Thanks folks.

I’m still working away on guides, with a couple more core set characters coming your way very soon…

These are all painted with a few changes made form the core set characters I’ve done in the past, and the rest of the core set characters may be a while before they’re tackled. I’m working on a few more conversions that are a bit more involved.

I’m also planning on working on filling some of the gaps. There are a few early characters I’ve not covered yet, and I will be going back to cover Hulk, M.O.D.O.K., Venom, Thanos and the Wakandans when I can. They’ll likely be with a twist on the standard colour scheme or some conversions. Let me know in the comments if theres a particularly cool colour scheme/alt costume you want to see.

I do have a bit of a backlog to tackle before any of that though…

The Inhumans are likely next up on the painting table, but then I would like to tackle some of the terrain. I’ve done some of the terrain from the core set before…

These have given me a bit of practice for the rest and I’m looking at putting together a guide for each of these peices of terrain as well.

Until next time, have a great one!

MCP -Baron Zemo & Black Widow

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Baron Zemo

Stage 1

Phoenician Purple: Apply a basecoat to the bodysuit.

Incubi Darkness: Apply a basecoat to the trousers, cuffs and jacket straps.

XV-88: Apply a basecoat to the hilt and crown.

Leadbelcher: Apply a basecoat to the sword and buckle.

Karak Stone: Apply a basecoat to the fur trim.

Eshin Grey: Apply a basecoat to the jacket and boots.

Stage 2

Xereus Purple: Apply a layer to the bodysuit.

Thunderhawk Blue: Apply a layer to the trousers, cuffs and jacket straps.

Averland Sunset: Apply a layer to the hilt and crown.

Nuln Oil: Apply a shade to the blade and buckle.

Rakarth Flesh: Apply a layer to the fur trim.

Dawnstone: Apply a layer to the jacket and boots.

Stage 3

Genestealer Purple: Apply a line highlight to the bodysuit.

Russ Grey: Apply a line highlight to the trousers, cuffs and jacket straps.

Yriel Yellow: Apply an edge highlight to the hilt and crown.

Ironbreaker: Apply a layer to the blade and buckle.

Pallid Wych Flesh: Apply a layer to the fur trim.

Celestra Grey: Apply a line highlight to the jacket and boots.

Stage 4

Dechala Lilac: Apply a spot highlight to the bodysuit.

Fenrisian Grey: Apply a spot highlight to the trousers, cuffs and jacket straps.

Dorn Yellow: Apply a spot highlight to the hilt and crown.

Stormhost Silver: Apply a spot highlight to the sword and buckle.

White Scar: Apply a layer to the eyes and a spot highlight to the fur trim.

Krieg Khaki: Apply a spot highlight to the jacket and boots.

Finish by painting the base with the Base Painting guide.

Black Widow

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit.

Iron Warriors: Apply a basecoat to the belt, gun and bracelets.

Khorne Red: Apply a basecoat to the hair, symbols and wrists.

Bugman’s Glow: Apply a basecoat to the skin.

Eshin Grey: Apply a basecoat to the straps and holster.

Stage 2

Thunderhawk Blue: Apply a layer to the bodysuit.

Nuln Oil: Apply a shade to the metals.

Mephiston Red: Apply a layer to the hair, symbols and wrists.

Cadian Fleshtone: Apply a layer to the skin.

Dawnstone: Apply a line highlight to the straps and holster.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit.

Drakenhof Nightshade: Apply a shade to the metals.

Evil Sunz Scarlet: Apply a line highlight to the hair and wrists.

Basic Skintone 70.815(Vallejo): Apply a highlight to the skin.

Celestra Grey: Apply a line highlight to the straps and holster.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit.

Ironbreaker: Apply a spot highlight to the metals.

Wild Rider Red: Apply a spot highlight to the hair and wrists.

Light Flesh 70.928 (Vallejo): Apply a spot highlight to the skin.

Krieg Khaki: Apply a spot highlight to the straps and holster.

Finish by painting the base with the Base Painting guide.