MCP – Cassandra Nova & Jean Gray Painting Guide

Welcome to my latest painting guide! Cassandra Nova and Jean Grey bring their psychic potency to my roster.


I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!


Prep: Fully build both models. Undercoat black.

Cassandra Nova

Stage 1

Thondia Brown: Apply a basecoat to the jacket, boots and belt.

Incubi Darkness: Apply a basecoat to the shirt.

Steel Legion Drab: Apply a basecoat to the trousers.

Warpstone Glow: Apply a basecoat to the psychic powers.

Skrag Brown: Apply a basecoat to the scarf.

Leadbelcher: Apply a basecoat to the buckle and cane.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Mournfang Brown: Apply a layer to the jacket, boots and belt.

Thunderhawk Blue: Apply a layer to the shirt.

Tallarn Sand: Apply a layer to the trousers 

Moot Green: apply a layer to the psychic powers.

Deathclaw Brown: Apply a layer to the scarf.

Nuln Oil: Apply a shade to the buckles and cane.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Steel Legion Drab: Apply a line highlight to the jacket, boots and belt.

Russ Grey: Apply a line highlight to the shirt.

Karak Stone: Apply a line highlight to the trousers.

Orruk Flesh: Apply a line highlight to the psychic powers.

Tau Light Ochre: Apply a line highlight to the scarf.

Drakenhof Nightshade: Apply a shade to the buckles and cane.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 4

Karak Stone: Apply a spot highlight to the jacket, boots and belt.

Fenrisian Grey: Apply a spot highlight to the shirt.

Ushabti Bone: Apply a spot highlight to the trousers.

Gauss Blaster Green: Apply a spot highlight to the psychic powers.

Averland Sunset: Apply a spot highlight to the scarf.

Canoptek Alloy: Apply a spot highlight to the buckles and cane.

Light Flesh 70.928: Apply a spot highlight to the skin.

Finish by painting the base with the Base Painting guide.

Jean Gray

Stage 1

Tau Light Ochre: Apply a basecoat to the bodysuit.

Night Lord’s Blue: Apply a basecoat to the centre of the bodysuit, gloves, belt and shoulders.

Pink Horror: Apply a basecoat to the psychic powers.

Doombull Brown: Apply a basecoat to the hair.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Averland Sunset: Apply a layer to the bodysuit.

Macragge Blue: apply a layer to the centre strip of the bodysuit and gloves, belt and shoulders.

Emperor’s Children: Apply a thinned layer to the psychic powers.

Skrag Brown: Apply a layer to the hair.

Cadian Fleshtone: Apply a layer to the skin.

Stage 4

Flash Gitz Yellow: Apply a thinned layer to the bodysuit.

Caledor Sky: Apply a line highlight to the centre bodysuit, gloves, belt and shoulders.

Fulgrim Pink: Apply an edge highlight to the psychic powers.

Jokaero Orange: Apply a line highlight to the hair.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 3

Dorn Yellow: Apply a line highlight to the bodysuit.

Temple Guard Blue: Apply a line highlight to the centre bodysuit, gloves, belt and shoulders.

White Scar: Apply a spot highlight to the psychic powers.

Blood letter: Apply a thin layer to the hair.

Light Flesh 70.928: Apply a spot highlight to the skin.

Finish by painting the base with the Base Painting guide.

MCP – Deadpools Taco Truck Painting Guide

Welcome to my latest painting guide! Today I’m tackling the Taco Truck that comes with Deadpool. It’s a really fun addition to the pack loaded with details.


I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!


Prep: Fully build the truck and undercoat black.

Main Colour

Stage 1

Incubi Darkness: Apply a basecoat.

Stage 2

Thunderhawk Blue: Apply a drybrush, focussing toward the top and edges.

Stage 3

Russ Grey: Apply a line highlight.

Details

Stage 1

Leadbelcher: Apply a basecoat to the metals.

Khorne Red: Apply a basecoat to the reds.

Averland Sunset: Apply a basecoat to the mustard bottles and lights.

Squig Orange: Apply a basecoat to the turn signals and front decal flames.

Karak Stone: Apply a basecoat to the napkins.

Emperor’s Children: Apply a basecoat to the love hearts.

Tau Light Ochre: Apply a basecoat to the taco shell.

Warpstone Glow: Apply a basecoat to the taco lettuce.

Temple Guard Blue: Apply a basecoat to the sign background.

Genestealer Purple: Apply a basecoat to the sign background.

Stage 2

Nuln Oil: Apply a shade to the metals.

Mephiston Red: Apply a layer to the reds.

Yriel Yellow: Apply a layer to the lights.

Trollslayer Orange: Apply a layer to the turn signals and front decal flames.

Pallid Wych Flesh: Apply a layer to the napkins.

Fulgrim Pink: Apply a layer to the love hearts.

Zamesi Desert: Apply a layer to the taco shell.

Moot Green: Apply a layer to the taco lettuce.

Baharroth Blue: Apply a layer to the sign background.

Kakophoni Purple: Apply a layer to the sign background.

Stage 3

Drakenhof Nightshade: Apply a shade to the metals.

Evil Sunz Scarlet: Apply a line highlight to the reds.

Phalanx Yellow: Apply a layer to the yellow lights.

Fire Dragon Bright: Apply a layer to the turn signals and front decal flames.

White Scar: Apply a line highlight to the napkins.

Fulgrim Pink/White Scar: Make a 1:1 mix and apply a line highlight to the love hearts.

Karak Stone: Apply a line highlight to the tacos.

Gauss Blaster Green: Apply a line highlight to the taco lettuce.

Baharroth Blue/White Scar: Make a 1:1 mix and apply a line highlight to the sign background.

Dechala Lilac: Apply a line highlight to the sign background.

Stage 4

Stormhost Silver: Apply a line highlight to the metals.

Wild Rider Red: Apply a spot highlight to the reds.

Dorn Yellow: Apply a spot highlight to the yellow lights.

Lugganath Orange: Apply a spot highlight to the turn signals and decal flames.

Stage 1

White Scar: Water down the paint and carefully apply your menu choices.

MCP – Deadpool & Bob, Agent of Hydra Painting Guide

Welcome to my latest painting guide! This time I tackle the epic Deadpool and Bob, agent of hydra. This is a superb kit filled with cool features and a lot of extra parts. Don’t worry, I’ll be following up with the Taco Truck very soon!


I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!


Prep: Fully build both models, but do not glue the Fwoosh! to Deadpool. Undercoat black.

Deadpool

Stage 1

Khorne Red: Ap[ply a basecoat to the bodysuit.

Incubi Darkness: Apply a basecoat to the bodysuit markings, boot, gloves, scabbards and eyes.

Rhinox Hide: Apply a basecoat to the straps.

Leadbelcher: Apply a basecoat to the metals.

Stage 2

Mephiston Red: Apply a layer to the bodysuit.

Thunderhawk Blue: Apply a thinned layer to the bodysuit markings, boots, gloves, scabbards and eyes.

Mournfang Brown: Apply a layer to the straps.

Nuln Oil: Apply a shade to the metals.

Stage 3

Evil Sunz Scarlet: Apply a line highlight to the bodysuit.

Russ Grey: Apply a line highlight to the 

bodysuit markings, boots, gloves, scabbards and eyes.

Steel Legion Drab: Apply a line highlight to the straps.

Drakenhof Nightshade: Apply a shade to the metals.

Stage 4

Wild Rider Red: Apply a spot highlight to the bodysuit.

Fenrisian Grey: Apply a spot highlight to the bodysuit markings, boots, gloves, scabbards and eyes.

Karak Stone: Apply a spot highlight to the straps.

Ironbreaker: Apply a layer to the metals.

White Scar: Apply a layer to the eyes on the head and buckle.

Fwoosh! Stage 1

Khorne Red: Apply a basecoat to each letter.

Squig Orange

Tau Light Ochre

Warpstone Glow

Caledor Sky

Genestealer Purple

Emperor’s Children

Fwoosh! Stage 2

Mephiston Red: Apply an edge highlight as well as a thinned layer to the front, leading from the top.

Fire Dragon Bright

Yriel Yellow

Moot Green

Temple Guard Blue

Kakophoni Purple

Fulgrim Pink

Fwoosh! Stage 3

Evil Sunz Scarlet: Apply an edge highlight and another thinned layer.

Lugganath Orange

Dorn Yellow

Gauss Blaster Green

Baharroth Blue

Dechala Lilac

Fulgrim Pink/White Scar

Fwoosh! Stage 4

White Scar: Apply an edge highlight to the top edges.

Missile Trail Stage 1

Mephiston Red: Apply a basecoat to the explosion.

Missile Trail Stage 2

Trollslayer Orange: Apply a very thinned over the explosion. Build this up over a few coats, waiting for each to dry before moving onto the next.

Missile Trail Stage 3

Skavenblight Dinge: Apply a thinned layer to the outer most areas of the explosion.

Yriel Yellow: Apply a thinned layer to the crevices of the explosion moving closer to the centre than the last stage.

Missile Trail Stage 4

Abaddon Black: Apply a thinned layer to the very tips of the explosion.

Dorn Yellow: Apply a spot highlight to the centre of the explosion.

Finish by painting the base with the Base Painting guide.

Bob, Agent of Hydra

Stage 1

Warpstone Glow: Apply a basecoat to the bodysuit.

Averland Sunset: Apply a absecoat to the straps, eyes, boots and gloves.

Rhinox Hide: Apply a basecoat to the pouches, holster and case.

Leadbelcher: Apply a basecoat to the metals.

Celestra Grey: Apply a basecoat to the hat and case lettering.

Bugman’s Glow: Apply a basecoat to the skin.

Stage 2

Moot Green: Apply a layer to the bodysuit.

Yriel Yellow: Apply a layer to the straps, eyes, boots and gloves.

Mournfang Brown: Apply a layer to the pouches, holster and case.

Nuln Oil: Apply a shade to the metals.

Ulthuan Grey: Apply a layer to the hat and case lettering.

Cadian Fleshtone: Apply a layer to the skin.

Stage 3

Skarsnik Green/Yriel Yellow: Make a 1:1 mix and apply a line highlight to the bodysuit.

Phalanx Yellow: Apply a line highlight to the straps, boots and gloves. Apply a spot highlight to the eyes.

Steel Legion Drab: Apply a line highlight to the pouches, holster and case.

Drakenhof Nightshade: Apply a shade to the metals.

White Scar: Apply a layer to the hat and case lettering.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Stage 4

Gauss Blaster Green: Apply a spot highlight to the bodysuit.

Dorn Yellow: Apply a spot highlight to the straps, eyes, boots and gloves.

Karak Stone: Apply a spot highlight to the pouches, holster and case.

Ironbreaker: Apply a line highlight to the metals.

Light Flesh 70.928: Apply a line highlight to the skin.

Finish by painting the base with the Base Painting guide.

MCP – Cable & Domino Painting Guide

Welcome to my latest painting guide! This time covering the epic Cable and Domino. I’ve really been looking forward to this pair. Cable is one of my favourite models from MCP so far, with so many cool elements to get stuck into.


I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!


Prep: Fully build both models, but do not glue Cables energy shield to his base. Undercoat black.

Cable

Stage 1

Kantor Blue: Apply a basecoat to the bodysuit.

XV-88: Apply a basecoat to the leg armour and straps.

Incubi Darkness: Apply a basecoat to the shoulder guard and boots.

Bugman’s Glow: Apply a basecoat to the skin.

Steel Legion Drab: Apply a basecoat to the cloak.

Dryad Bark: Apply a basecoat to the pouches and shoulder strap.

Leadbelcher: Apply a basecoat to the gun, arm and buckles.

Celestra Grey: Apply a basecoat to the hair.

Retributor Armour: Apply a basecoat to the shells on the shoulder.

Mephiston Red: Apply a basecoat to the chest X.

Energy Shield Stage 1

Temple Guard Blue: Apply a basecoat to the shield.

Mephiston Red: Apply a basecoat to the impacts and explosions.

Stage 2

Caledor Sky: Apply a layer to the bodysuit.

Averland Sunset: Apply a layer to the leg armour and straps.

Thunderhawk Blue: Apply a basecoat to the shoulder guard and boots.

Cadian Fleshtone: Apply a layer to the skin.

Karak Stone: Apply a thinned layer to the cloak.

Nuln Oil: Apply a shade to the gun, arm, buckles and chest X.

Ulthuan Grey: Apply a layer to the hair.

Agrax Earthshade: Apply a shade to the shoulder shells.

Energy Shield Stage 2

Baharroth Blue: Apply a layer to the energy shield.

Trollslayer Orange: Apply a thinned layer to the explosions.

Skavenblight Dinge: Apply a thinned layer to the tips of the clouds.

Stage 3

Temple Guard Blue: Apply a line highlight to the bodysuit.

Yriel Yellow: Apply a line highlight to the leg armour and straps.

Russ Grey: Apply a spot highlight to the shoulder guard and boots.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Rakarth Flesh: Apply a line highlight to the cloak.

Drakenhof Nightshade: Apply a shade to the gun, arm, buckles and shells.

White Scar: Apply a spot highlight to the hair.

Mephiston Red: Apply a layer to the chest X.

Energy Shield Stage 3

Baharroth Blue/White Scar: Make a 1:1 mix and apply a line highlight to the energy shield.

Yriel Yellow: Apply a spot highlight to the centre of the explosions.

Abaddon Black: Apply a thinned layer to the tips of the clouds.

Stage 4

Baharroth Blue: Apply a line highlight to the bodysuit.

Dorn Yellow: Apply a spot highlight to the leg armour and straps.

Fenrisian Grey: Apply a spot highlight to the boots and shoulder guard.

Light Flesh 70.928: Apply a line highlight to the skin.

Pallid Wych Flesh: Apply a spot highlight to the cloak.

Ironbreaker: Apply a line highlight to the gun, arm and buckles.

Canoptek Alloy: Apply a spot highlight to the shells.

Evil Sunz Scarlet: Apply a spot highlight to the chest X.

Energy Shield Stage 4

White Scar: Apply a spot highlight to the energy shield, focussing around the blast sites.

Dorn Yellow: Apply a spot highlight to the explosions.

Finish by painting the base with the Base Painting guide.

Domino

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit, straps, guns and hair.

Rhinox Hide: Apply a basecoat to the pouches.

Caledor Sky: Apply a basecoat to the bodysuit accent.

Fenrisian Grey: Apply a basecoat to the skin.

Leadbelcher: Apply a basecoat to the buckles.

Stage 2

Thunderhawk Blue: Apply a layer to the bodysuit, straps and hair.

Dawnstone: Apply a line highlight to the guns.

Mournfang Brown: Apply a layer to the pouches 

Teclis Blue: Apply a layer to the bodysuit accent.

Rakarth Flesh: Apply a layer to the skin.

Nuln Oil: Apply a shade to the buckles.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit, straps and hair.

Celestra Grey: Apply a spot highlight to the guns.

Steel Legion Drab: Apply a line highlight to the pouches.

Baharroth Blue: Apply a spot highlight to the bodysuit accent.

Pallid Wych Flesh: Apply a line to the skin.

Drakenhof Nightshade: Apply a shade to the metals.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit, straps and hair.

Karak Stone: Apply a spot highlight to the pouches.

White Scar: Apply a spot highlight to the skin.

Ironbreaker: Apply a line highlight to the buckles.

Finish by painting the base with the Base Painting guide & Explosions Painting Guide.