Avengers

MCP – Hulkbuster Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide! Hulkbuster, the largest miniature that I’ve painted for MCP so far.

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models. Undercoat black.

Red, Gold & Metal

Stage 1

Word Bearers Red: Apply basecoat to the red panels.

Skrag Brown: Apply a basecoat to the golds.

Leadbelcher: Apply a basecoat to the metals.

Stage 2

Wazdakka Red: Apply a thinned layer to the red panels. Start from the top of the panel working down.

Tau Light Ochre: Apply a thinned layer to the golds. Like the last stage work from the top down.

Drakenhof Nightshade: Apply a shade to the metals.

Nuln Oil: Once the previous shade has dried, apply a shade of Nuln Oil.

Stage 3

Evil Sunz Scarlet: Apply a line highlight to the top edges of the red panel. Apply a very light thinned layer to the tops of the panels.

Flash Gitz Yellow: Apply a line highlight to the gold panels.

Ironbreaker: Apply a line highlight to the metals.

Stage 4

Wild Rider Red: Apply a fine line highlight to the top and side edges of the panels.

Dorn Yellow: Apply a line highlight to the top edges of the gold panels.

Stormhost Silver: Apply a spot highlight to the metals.

Stage 5

Slaanesh Grey: Apply a spot highlight to the red panels, focussing on the top corner and ,meeting points.

White Scar: Apply a spot highlight to the gold panels.

Arc Reactors

Stage 1

Temple Guard Blue: Apply a basecoat.

Stage 2

Baharroth Blue: Apply a thinned layer to the centre.

Stage 3

Blue Horror: Apply a thinned layer to the centre, decreasing the size compared to the last stage.

Stage 4

White Scar: Apply a spot highlight to the centre.

Base Repulsor Blasts

Stage 1

Mephiston Red: Apply a basecoat to the clouds.

Temple Guard Blue: Apply a basecoat to the repulsor blasts.

Stage 2

Troll Slayer Orange: Make a mix with around 5 parts water to 1 part paint and apply over the cloud. once dry repeat 2-3 times to help build the colour.

Baharroth Blue: Apply a thinned layer to the repulsor blast, from the bottom up.

Stage 3

Blue Horror: Apply a line highlight following the twists of the repulsor blasts.

Yriel Yellow: Apply a thinned line highlight to the crevasses featering the highest concentration of orange, and apply lines meeting the repulsor blasts.

Skavenblight Dinge: Apply a thinned layer ot the clouds, avoiding the brightest orange areas.

Stage 4

White Scar: Apply a spot highlight to the twists of the repulsor blasts.

Dorn Yellow: Apply a spot highlight to the brightest parts of the cloud.

Abaddon Black: Apply a thinned layer to the darkest areas of the clouds.

Finish by painting the base with the Base Painting guide.

MCP – Omega Red Painting Guide

/ Deathwatch Studios / 4 Comments

Welcome to my latest painting guide! Omega Red hits the painting table. A fairly chunky model with some cool but very flexible tentacles.

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build the model. Undercoat black.

Stage 1

Word Bearers Red: Apply a basecoat to the clothing and armour interiors on the shoulders and wrists.

Leadbelcher: Apply a basecoat to the armour and tentacles.

Karak Stone: Apply a basecoat to the skin.

Balor Brown: Apply a basecoat to the hair.

Stage 2

Druchii Violet: Apply a shade to the reds.

Drakenhof Nightshade: Apply a shade to the metals.

Agrax Earthshade: Apply a shade to o teh skin and hair.

Stage 3

Wazdakka Red: Apply a thinned layer to the reds.

Ironbreaker: Apply a line highlight to the metals.

Rakarth Flesh: Apply a layer to the skin.

Blonde Hair 09257: Apply a layer to the hair.

Stage 4

Evil Sunz Scarlet: Apply a line highlight to the reds.

Stormhost Silver: Apply a spot highlight to the metals.

Pallid Wych Flesh: Apply a line highlight to the skin.

Blonde Highlight 09258: Apply a spot highlight to the hair.

Finish by painting the base with the Base Painting guide.

MCP – Ms. Marvel Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide! Ms. Marvel in both her normal and embiggened form, a model that surprised me with its size, coming head to head in height with the Hulk!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models. Undercoat black.

Stage 1

Word Bearers Red: Apply a basecoat to the legs, arms and scarf.

Mournfang Brown: Apply a basecoat to the skin.

Dryad Bark: Apply a basecoat to the hair.

Tau Light Ochre: Apply a basecoat to the bolt and lining.

Macragge Blue: Apply a basecoat to the top, boots and mask.

Stage 2

Mephiston Red: Apply a layer to the legs, arms and scarf.

Knight-questor Flesh: Apply a layer to the skin.

Mournfang Brown: Apply a layer to the hair.

Yriel Yellow: Apply a layer to the bolt and lining.

Caledor Sky: Apply a layer to the top, boots and mask.

Stage 3

Evil Sunz Scarlet: Apply a thinned layer to the legs, arms and scarf.

Cadian Fleshtone: Apply a thinned layer to the skin.

Steel Legion Drab: Apply a line highlight to the hair.

Phalanx Yellow: Apply a line highlight to the bolt and a spot highlight to the lining.

Teclis Blue: Apply a thinned layer to the top, boots and mask.

Stage 4

Wild Rider Red: Apply a line highlight to the legs, arms and scarf.

Kislev Flesh: Apply a line highlight to the skin.

Karak Stone: Apply a spot highlight to the hair.

Dorn Yellow: Apply a spot highlight to the bolt and lining.

Lothern Blue:Apply a line highlight to the top, boots and mask.

Finish by painting the base with the Base Painting guide and the broken barrier like the Construction Terrain.

MCP – The Amazing Spider-man and Black Cat Painting Guide

/ Deathwatch Studios / 3 Comments

Welcome to my latest painting guide! Today we’re looking at the Amazing Spider-Man, a truly ‘amazing’ model, and Black Cat, one of the coolest ‘flip’ models I’ve seen.

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models. Undercoat black.

The Amazing Spider-man

Stage 1

Mephiston Red: Apply a basecoat to the red suit sections.

Macragge Blue: Apply a basecoat to the blue sections of the suit.

Leadbelcher: Apply a basecoat to the tower.

Fenrisian Grey: Apply a basecoat to the webbing.

Incubi Darkness: Apply a basecoat to the spider symbols and eye border.

Celestra Grey: Apply a basecoat to the eyes.

Khorne Red: Apply a basecoat to the Daily Bugle lettering.

Skrag Brown: Apply a basecoat to the Daily Bugle symbol.

Stage 2

Druchii Violet: Apply a shade to the red areas of the suit. Use a fairly light coat as this stage is to bring out the webbing.

Caledor Sky: Apply a layer to the blue sections of the suit.

Drakenhof Nightshade: Apply a shade to the tower and dish.

Blue Horror: Apply a layer to the webbing.

Thunderhawk Blue: Apply a thinned layer to the spider symbols and eye lining.

Ulthuan Grey: Apply a layer to the eyes.

Wazdakka Red: Apply an edge highlight and a thinned layer to the Daily Bugle lettering.

Tau Light Ochre: Apply an edge highlight and a thinned layer to the Daily Bugle symbol.

Stage 3

Evil Sunz Scarlet: Apply a layer to the red sections of the suit.

Teclis Blue: Apply a line highlight to the blue sections of the bodysuit.

Skrag Brown: Make a mix with around 5 parts water and apply lightly to the random sections of the tower and dish.

White Scar: Apply a layer to the webbing and eyes.

Russ Grey: Apply a line highlight to the spider symbols and eye lining.

Evil Sunz Scarlet: Apply an edge highlight to the Daily Bugle lettering.

Flash Gitz Yellow: Apply an edge highlight to the Daily Bugle Symbol.

Stage 4

Wild Rider Red: Apply a line highlight to the top of each section of red suit.

Lothern Blue: Applya line highlight ot the blue sections of the suit.

Ironbreaker: Apply a light highlight to the tower and dish.

Fenrisian Grey: Apply a spot highlight to the spider symbols and eye lining.

Wild Rider Red: Apply an edge highlight to the top edges of the Daily Bugle lettering.

Dorn Yellow: Apply a spot highlight to the Daily Bugle Symbol.

Finish by painting the base with the Base Painting guide and Explosion Painting Guide.

Black Cat

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit, collar, whip and mask.

Celestra Grey: Apply a basecoat to the fur trims and base webbing.

Bugman’s Glow: Apply a basecoat to the skin.

Leadbelcher: Apply a basecoat to the girder.

Stage 2

Thunderhawk Blue: Apply a thinned layer to the bodysuit, collar, whip handle and mask.

Ulthuan Grey: Apply a layer to the fur trim.

Cadian Fleshtone: Apply a layer to the skin.

Nuln Oil: Apply a shade to the girder.

Dawnstone: Apply a layer to the whip.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit, collar, whip handle and mask.

White Scar: Apply a layer to the fur lining and eyes.

Basic Skin Tone 70.815: Apply a thinned layer to the skin.

Drakenhof Nightshade: Apply a shade to the girder.

Celestra Grey: Apply a highlight to the whip.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit, collar, whip handle and mask.

Light Flesh 70.928: Apply a line highlight to the skin.

Abaddon Black: Apply pupils to the eyes.

Finish by painting the base with the Base Painting guide.

MCP – Captain America & War Machine Painting Guide

/ Deathwatch Studios / 2 Comments

Welcome to my latest painting guide! Today I’m tackling the the amazing Captain America & War Machine set.
This obviously has a few similarities with the Steve Rogers Captain America, so check out that guide for some close ups of how to paint the shield.

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Captain America

Stage 1

Celestra Grey: Apply a basecoat to the cowl, detailing, sleeves and wing panels.

Khorne Red: Apply a basecoat to the boots, gloves, wings and lenses.

Kantor Blue: Apply a basecoat to the bodysuit.

Rhinox Hide: Apply a basecoat to the skin and hair.

Leadbelcher: Apply a basecoat to the belt, shield back, backpack and glasses frames.

Stage 2

Ulthuan Grey: Apply a layer to the whites.

Mephiston Red: Apply a layer to the reds.

Caledor Sky: Apply a layer to the blues.

Mournfang Brown: Apply a layer to the skin and a stippling to the hair.

Nuln Oil: Apply a shade to the metals.

Stage 3

White Scar: Apply a layer to the whites.

Evil Sunz Scarlet: Apply a thinned layer to the reds.

Teclis Blue: Apply a thinned layer to the blues.

Knight-Questor Flesh: Apply a line highlight to the skin.

Steel Legion Drab: Apply a spot highlight to the hair.

Drakenhof Nightshade: Apply a shade to the metals.

Stage 4

Wild Rider Red: Apply a line highlight to the reds.

Lothern Blue: Apply a line highlight to the blues.

Cadian Fleshtone: Apply a spot highlight to the skin.

Stormhost Silver: Apply a line highlight to the metals.

nish by painting the base with the Base Painting guide and Explosion Painting Guide.

War Machine

Metals

Stage 1

Iron Warriors: Apply a basecoat to the whole mini.

Ironbreaker: Apply a basecoat to the face and details.

Stage 2

Nuln Oil: Apply a shade to the whole mini and wait to dry.

Drakenhof Nightshade: Apply a shade to the whole model.

Stage 3

Leadbelcher: Apply a very light drybrush across the mini.

Ironbreaker: Apply a layer to the face and details.

Stage 4

Ironbreaker: Apply a line highlight to the armour.

Stormhost Silver: Apply a line highlight to the face and details.

Lights

Stage 1

Mephiston Red: Apply a basecoat to the detail.

Stage 2

Evil Sunz Scarlet: Apply a thinned layer to the details.

Stage 3

Wild Rider Red: Apply a spot highlight to the details.

Stage 4

Lugganath Orange: Apply a spot highlight to the chest light.

Finish by painting the base with the Base Painting guide and Explosion Painting Guide.

MCP – Captain America & Red Skull Painting Guide

/ Deathwatch Studios / 1 Comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Captain America

Stage 1

Caledor Sky: Apply a basecoat to the suit.

Khorne Red: Apply a basecoat to the gloves, boots and stripes.

Celestra Grey: Apply a basecoat to the alternative stripes, sleeves, wings and A’s.

Bugman’s Glow: Apply a basecoat to the skin.

Rhinox Hide: Apply a basecoat to the pouches and straps.

Leadbelcher: Apply a basecoat to the buckles and chest star.

Shield Stage 1

Caledor Sky: Apply a basecoat to the innermost ring.

Khorne Red: Apply a basecoat to the outer and inner circle.

Dawnstone: Apply a basecoat to the middle ring.

Leadbelcher: Apply a basecoat to the star.

Stage 2

Teclis Blue: Apply a layer to the suit.

Mephiston Red: Apply a layer to the gloves, boots and stripes.

Ulthuan Grey: Apply a layer to the alternative stripes, sleeves, wings and A’s.

Cadian Fleshtone: Apply a layer to the skin.

Mournfang Brown: Apply a layer to the pouches and straps.

Drakenhof Nightshade: Apply a shade to the buckles and star.

Shield Stage 2a

Teclis Blue: Apply a layer to the inner ring.

Mephiston Red: Apply a guideline to the outer and inner ring. Apply them where you would like the light shines to show. Also apply a line around the edges.

Celestra Grey: Apply a guideline to the middle ring. Also apply a line around the edges.

Drakenhof Nightshade: Apply a shade to the star.

Shield Stage 2b

Mephiston Red: Thin your paint, with water or Lahmian Medium, and begin to build up the colour in the rings, working back towards the guideline.

Celestra Grey: Repeat with the middle ring.

Stage 3

Lothern Blue: Apply a line highlight to the suit.

Evil Sunz Scarlet: Apply a line highlight to the gloves, boots and stripes.

White Scar: Apply a layer to the alternative stripes, sleeves, wings and A’s.

Basic Skin Tone 70.815(Vallejo): Apply a thinned layer to the skin.

Steel Legion Drab: Apply a line highlight to the pouches and straps.

Ironbreaker: Apply a line highlight to the buckles and star.

Shield Stage 3

Lothern Blue: Apply a line highlight to the inner ring.

Evil Sunz Scarlet: Repeat the same method from the previous stage. Apply a guideline and an edge highlight first, then build the colour towards the guideline, just make sure to leave a little of the previous colour showing to build the gradient.

Ulthuan Grey: Repeat with the middle ring.

Ironbreaker: Apply a line highlight to the star.

Stage 4

Blue Horror: Apply a spot highlight to the suit.

Wild Rider Red: Apply a spot highlight to the gloves, boots and stripes.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Karak Stone: Apply a spot highlight to the pouches and straps.

Stormhost Silver: Apply a spot highlight to the buckles and star.

Shield Stage 4

Blue Horror: Apply a spot highlight to the inner circle.

Wild Rider Red: Begin with the guidelineand Apply an edge highlight but not all the way around only a little arc above and below the guidelines. Then apply a very small amount of thinned paint around the guidelines.

White Scar: Repeat with the middle ring.

Stormhost Silver: Apply a spot highlight to the star.

Finish by painting the base with the Base Painting guide.

Red Skull

Stage 1

Incubi Darkness: Apply a basecoat to the stormcoat.

Eshin Grey: Apply a basecoat to the straps, shirt, gloves and boots.

Khorne Red: Apply a basecoat to the skin and hydra symbols.

Teclis Blue: Apply a basecoat to the cube.

Leadbelcher: Apply a basecoat to the buckles.

Stage 2

Thunderhawk Blue: Apply a layer to the stormcoat.

Dawnstone: Apply a layer to the straps, shirt, gloves and boots.

Mephiston Red: Apply a layer to the skin and hydra symbols.

Lothern Blue: Apply a layer to the centre of the cube.

Nuln Oil: Apply a shade to the buckles.

Stage 3

Russ Grey: Apply a line highlight to the stormcoat.

Celestra Grey: Apply a line highlight to the straps, shirt, gloves and boots.

Evil Sunz Scarlet: Apply a line highlight to the skin and hydra symbols.

Baharroth Blue: Apply a layer to the centre of the cube.

Drakenhof Nightshade: Apply a shade to the buckles.

Stage 4

Fenrisian Grey: Apply a spot highlight to the stormcoat.

Wild Rider Red: Apply a spot highlight to the skin.

White Scar: Apply a spot highlight to the centre of the cube and a line highlight to the edges.

Ironbreaker: Apply a spot highlight to the buckles.

Finish by painting the base with the Base Painting guide.

MCP – Quicksilver & Scarlet Witch Painting Guide

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Quicksilver

Stage 1

Caledor Sky: Apply a basecoat to the bodysuit.

Celestra Grey: Apply a basecoat to the suit pattern, boots, gloves and hair.

Bugman’s Glow: Apply a basecoat to the skin.

Mephiston Red: Apply a basecoat to the explosion.

Stage 2

Teclis Blue: Apply a layer to the bodysuit.

Ulthuan Grey: Apply a layer to the suit pattern, boots, gloves and hair.

Cadian Fleshtone: Apply a layer to the skin.

Trollslayer Orange: Apply a thinned layer of the centre of the explosion.

Skavenblight Dinge: Apply a layer to the out most areas of the explosion.

Stage 3

Lothern Blue: Apply a thinned layer to the bodysuit.

White Scar: Apply a thinned layer to the suit pattern, boots, gloves and hair.

Basic Skintone 70.815(Vallejo): Apply a thinned layer to the skin.

Yriel Yellow: Apply a thinned layer to the explosion moving closer than the last stage.

Abaddon Black: Apply a thinned layer to the tips of the explosion.

Stage 4

Blue Horror: Apply a line highlight to the suit.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Dorn Yellow: Apply a spot highlight to the centre of the explosion.

Finish by painting the base with the Base Painting guide.

Scarlet Witch

Stage 1

Mephiston Red: Apply a basecoat to the bodysuit, cape, boots, gloves and tiara.

Emperor’s Children: Apply a basecoat to the undersuit.

Screamer Pink: Apply a basecoat to the magic.

Bugman’s Glow: Apply a basecoat to the skin.

Khorne Red: Apply a basecoat to the hair.

Stage 2

Evil Sunz Scarlet: Apply a thinned layer and edge highlight to the bodysuit, cape, boots, gloves and tiara. Apply a layer to the magic.

Fulgrim Pink: Apply a layer to the undersuit.

Cadian Fleshtone: Apply a layer to the skin.

Wazdakka Red: Apply a layer to the hair.

Stage 3

Evil Sunz Scarlet/Slaanesh Grey: Make a 1:1 mix and apply a line highlight to the bodysuit, cape, boots, gloves and tiara.

Pink Horror: Apply a thinned layer to the magic.

Fulgrim Pink: Apply a thinned layer to the undersuit.

Basic Skin Tone 70.815(Vallejo): Apply a thinned layer to the skin.

Squig Orange: Apply a line highlight to the hair.

Stage 4

Slaanesh Grey: Apply a spot highlight to the bodysuit, cape, boots, gloves and tiara.

Emperor’s Children: Apply a spot highlight to the magic.

Fulgrim Pink/White Scar: Make a 1:1 mix and apply a line highlight to the undersuit.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Bloodletter: Apply a glaze to the hair.

Finish by painting the base with the Base Painting guide.

MCP – Another Painting Guide Update!

/ Deathwatch Studios / 2 Comments

I wanted to start by saying thank you to all of the people that have got in touch to say they appreciate the guides. It makes my day to hear that people are finding them so helpful. Thanks folks.

I’m still working away on guides, with a couple more core set characters coming your way very soon…

These are all painted with a few changes made form the core set characters I’ve done in the past, and the rest of the core set characters may be a while before they’re tackled. I’m working on a few more conversions that are a bit more involved.

I’m also planning on working on filling some of the gaps. There are a few early characters I’ve not covered yet, and I will be going back to cover Hulk, M.O.D.O.K., Venom, Thanos and the Wakandans when I can. They’ll likely be with a twist on the standard colour scheme or some conversions. Let me know in the comments if theres a particularly cool colour scheme/alt costume you want to see.

I do have a bit of a backlog to tackle before any of that though…

The Inhumans are likely next up on the painting table, but then I would like to tackle some of the terrain. I’ve done some of the terrain from the core set before…

These have given me a bit of practice for the rest and I’m looking at putting together a guide for each of these peices of terrain as well.

Until next time, have a great one!

MCP -Baron Zemo & Black Widow

/ Deathwatch Studios / Leave a comment

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Baron Zemo

Stage 1

Phoenician Purple: Apply a basecoat to the bodysuit.

Incubi Darkness: Apply a basecoat to the trousers, cuffs and jacket straps.

XV-88: Apply a basecoat to the hilt and crown.

Leadbelcher: Apply a basecoat to the sword and buckle.

Karak Stone: Apply a basecoat to the fur trim.

Eshin Grey: Apply a basecoat to the jacket and boots.

Stage 2

Xereus Purple: Apply a layer to the bodysuit.

Thunderhawk Blue: Apply a layer to the trousers, cuffs and jacket straps.

Averland Sunset: Apply a layer to the hilt and crown.

Nuln Oil: Apply a shade to the blade and buckle.

Rakarth Flesh: Apply a layer to the fur trim.

Dawnstone: Apply a layer to the jacket and boots.

Stage 3

Genestealer Purple: Apply a line highlight to the bodysuit.

Russ Grey: Apply a line highlight to the trousers, cuffs and jacket straps.

Yriel Yellow: Apply an edge highlight to the hilt and crown.

Ironbreaker: Apply a layer to the blade and buckle.

Pallid Wych Flesh: Apply a layer to the fur trim.

Celestra Grey: Apply a line highlight to the jacket and boots.

Stage 4

Dechala Lilac: Apply a spot highlight to the bodysuit.

Fenrisian Grey: Apply a spot highlight to the trousers, cuffs and jacket straps.

Dorn Yellow: Apply a spot highlight to the hilt and crown.

Stormhost Silver: Apply a spot highlight to the sword and buckle.

White Scar: Apply a layer to the eyes and a spot highlight to the fur trim.

Krieg Khaki: Apply a spot highlight to the jacket and boots.

Finish by painting the base with the Base Painting guide.

Black Widow

Stage 1

Incubi Darkness: Apply a basecoat to the bodysuit.

Iron Warriors: Apply a basecoat to the belt, gun and bracelets.

Khorne Red: Apply a basecoat to the hair, symbols and wrists.

Bugman’s Glow: Apply a basecoat to the skin.

Eshin Grey: Apply a basecoat to the straps and holster.

Stage 2

Thunderhawk Blue: Apply a layer to the bodysuit.

Nuln Oil: Apply a shade to the metals.

Mephiston Red: Apply a layer to the hair, symbols and wrists.

Cadian Fleshtone: Apply a layer to the skin.

Dawnstone: Apply a line highlight to the straps and holster.

Stage 3

Russ Grey: Apply a line highlight to the bodysuit.

Drakenhof Nightshade: Apply a shade to the metals.

Evil Sunz Scarlet: Apply a line highlight to the hair and wrists.

Basic Skintone 70.815(Vallejo): Apply a highlight to the skin.

Celestra Grey: Apply a line highlight to the straps and holster.

Stage 4

Fenrisian Grey: Apply a spot highlight to the bodysuit.

Ironbreaker: Apply a spot highlight to the metals.

Wild Rider Red: Apply a spot highlight to the hair and wrists.

Light Flesh 70.928 (Vallejo): Apply a spot highlight to the skin.

Krieg Khaki: Apply a spot highlight to the straps and holster.

Finish by painting the base with the Base Painting guide.

MCP – Sabretooth & Wolverine Painting Guide

/ Deathwatch Studios / 2 Comments

Welcome to my latest painting guide!

I need your support. Because my guides takes time and supplies to do, any support you can offer would mean the world to me. A supportive message in the comments is enough, but if you have the means why not send me a gift on Ko-Fi or PayPal. Thank you!

Prep: Fully build both models and undercoat black.

Sabretooth

Stage 1

XV88: Apply a basecoat to the lighter bodysuit areas.

Rhinox Hide: Apply a basecoat to the darker bodysuit areas.

Zamesi Desert: Apply a basecoat to the hair.

Bugman’s Glow: Apply a basecoat to the skin.

Karak Stone: Apply a basecoat to the fur trim.

Stage 2

Agrax Earthshade: Apply a shade to the light bodysuit, hair and fur trim.

Mournfang Brown: Apply a layer to the darker bodysuit areas.

Cadian Fleshtone; Apply a layer to the skin.

Stage 3

Balor Brown: Apply a layer to the lighter bodysuit areas, focussing towards the tops of the muscles and features.

Steel Legion Drab: Apply a line highlight to the darker bodysuit areas.

Blonde Hair 9257(MSP): Apply a layer to the hair.

Basic Skintone 70.815(Vallejo): Apply a layer to the skin.

Karak Stone: Apply a layer to the fur trim.

Bloodletter: Apply a glaze to the mouth.

Stage 4

Krieg Khaki: Apply a highlight to the muscles and features of the lighter bodysuit areas.

Karak Stone: Apply a spot highlight to the darker bodysuit areas.

Blonde Highlight 9258(MSP): Apply a spot highlight to the hair.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Pallid Wych Flesh: Apply a highlight to the fur trim and a layer to the teeth.

White Scar: Apply a layer to the eyes.

Finish by painting the base and rocks with the Base Painting guide.

Wolverine

Stage 1

Averland Sunset: Apply a layer to the bodysuit.

Caledor Sky: Apply a basecoat to the shoulders, gloves, boots and pants.

Leadbelcher: Apply a basecoat to the claws.

Bugman’s Glow: Apply a basecoat to the skin.

Mournfang Brown: Apply a basecoat to the belt.

Incubi Darkness: Apply a basecoat to the mask and stripes.

Stage 2

Agrax Earthshade: Apply a shade to the bodysuit.

Nuln Oil: Apply a shade to the blues.

Cadian Fleshtone: Apply a layer to the skin.

Thunderhawk Blue: Apply a layer to the mask and stripes, focussing towards the edges.

Stage 3

Yriel Yellow: Apply a layer to the bodysuit.

Teclis Blue: Apply a layer to the blues.

Ironbreaker: Apply a layer to the claws.

Basic Skintone 70.815(Vallejo): Apply a layer to the skin.

Skrag Brown: Apply a line highlight to the belt.

Dawnstone: Apply a line highlight to the mask and stripes.

Bloodletter: Apply a glaze to the mouth.

Evil Sunz Scarlet: Apply a layer to the interior of the buckle.

Stage 4

Dorn Yellow: Apply a line highlight to the bodysuit.

Temple Guard Blue: Apply a line highlight to the blues.

Stormhost Silver: Apply a layer to the claws.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Deathclaw Brown: Apply a spot highlight to the belt.

Celestra Grey: Apply a spot highlight to the mask and stripes.

Pallid Wych Flesh: Apply a layer to the teeth.

White Scar: Apply a layer to the eyes.

Finish by painting the base and rocks with the Base Painting guide.

Gallery