MCP – Captain America & Red Skull Painting Guide

Prep: Fully build both models and undercoat black.

Captain America

Stage 1

Caledor Sky: Apply a basecoat to the suit.

Khorne Red: Apply a basecoat to the gloves, boots and stripes.

Celestra Grey: Apply a basecoat to the alternative stripes, sleeves, wings and A’s.

Bugman’s Glow: Apply a basecoat to the skin.

Rhinox Hide: Apply a basecoat to the pouches and straps.

Leadbelcher: Apply a basecoat to the buckles and chest star.

Shield Stage 1

Caledor Sky: Apply a basecoat to the innermost ring.

Khorne Red: Apply a basecoat to the outer and inner circle.

Dawnstone: Apply a basecoat to the middle ring.

Leadbelcher: Apply a basecoat to the star.

Stage 2

Teclis Blue: Apply a layer to the suit.

Mephiston Red: Apply a layer to the gloves, boots and stripes.

Ulthuan Grey: Apply a layer to the alternative stripes, sleeves, wings and A’s.

Cadian Fleshtone: Apply a layer to the skin.

Mournfang Brown: Apply a layer to the pouches and straps.

Drakenhof Nightshade: Apply a shade to the buckles and star.

Shield Stage 2a

Teclis Blue: Apply a layer to the inner ring.

Mephiston Red: Apply a guideline to the outer and inner ring. Apply them where you would like the light shines to show. Also apply a line around the edges.

Celestra Grey: Apply a guideline to the middle ring. Also apply a line around the edges.

Drakenhof Nightshade: Apply a shade to the star.

Shield Stage 2b

Mephiston Red: Thin your paint, with water or Lahmian Medium, and begin to build up the colour in the rings, working back towards the guideline.

Celestra Grey: Repeat with the middle ring.

Stage 3

Lothern Blue: Apply a line highlight to the suit.

Evil Sunz Scarlet: Apply a line highlight to the gloves, boots and stripes.

White Scar: Apply a layer to the alternative stripes, sleeves, wings and A’s.

Basic Skin Tone 70.815(Vallejo): Apply a thinned layer to the skin.

Steel Legion Drab: Apply a line highlight to the pouches and straps.

Ironbreaker: Apply a line highlight to the buckles and star.

Shield Stage 3

Lothern Blue: Apply a line highlight to the inner ring.

Evil Sunz Scarlet: Repeat the same method from the previous stage. Apply a guideline and an edge highlight first, then build the colour towards the guideline, just make sure to leave a little of the previous colour showing to build the gradient.

Ulthuan Grey: Repeat with the middle ring.

Ironbreaker: Apply a line highlight to the star.

Stage 4

Blue Horror: Apply a spot highlight to the suit.

Wild Rider Red: Apply a spot highlight to the gloves, boots and stripes.

Light Flesh 70.928(Vallejo): Apply a spot highlight to the skin.

Karak Stone: Apply a spot highlight to the pouches and straps.

Stormhost Silver: Apply a spot highlight to the buckles and star.

Shield Stage 4

Blue Horror: Apply a spot highlight to the inner circle.

Wild Rider Red: Begin with the guidelineand Apply an edge highlight but not all the way around only a little arc above and below the guidelines. Then apply a very small amount of thinned paint around the guidelines.

White Scar: Repeat with the middle ring.

Stormhost Silver: Apply a spot highlight to the star.

Finish by painting the base with the Base Painting guide.

Red Skull

Stage 1

Incubi Darkness: Apply a basecoat to the stormcoat.

Eshin Grey: Apply a basecoat to the straps, shirt, gloves and boots.

Khorne Red: Apply a basecoat to the skin and hydra symbols.

Teclis Blue: Apply a basecoat to the cube.

Leadbelcher: Apply a basecoat to the buckles.

Stage 2

Thunderhawk Blue: Apply a layer to the stormcoat.

Dawnstone: Apply a layer to the straps, shirt, gloves and boots.

Mephiston Red: Apply a layer to the skin and hydra symbols.

Lothern Blue: Apply a layer to the centre of the cube.

Nuln Oil: Apply a shade to the buckles.

Stage 3

Russ Grey: Apply a line highlight to the stormcoat.

Celestra Grey: Apply a line highlight to the straps, shirt, gloves and boots.

Evil Sunz Scarlet: Apply a line highlight to the skin and hydra symbols.

Baharroth Blue: Apply a layer to the centre of the cube.

Drakenhof Nightshade: Apply a shade to the buckles.

Stage 4

Fenrisian Grey: Apply a spot highlight to the stormcoat.

Wild Rider Red: Apply a spot highlight to the skin.

White Scar: Apply a spot highlight to the centre of the cube and a line highlight to the edges.

Ironbreaker: Apply a spot highlight to the buckles.

Finish by painting the base with the Base Painting guide.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s